Coping Crown Molding With A Grinder

🔥+ Coping Crown Molding With A Grinder 15 Jul 2020 (Continued from preceding page) BUILD 30% FUEL SAVING, Copper Coil Smoke ... Flint Woodworking, 952 Stafford, Storrs, CT 06268 WOODEN Toy Plans. ... BUILD Log Cabins, Rustic Furniture, Fireplaces!!! ... Mix permanent paint yourself from inexpensive materials, purchase at local stores and save 900%! Painter's ...

Coping Crown Molding With A Grinder Is there a price for this room in attic trusses? ... The house is only 28 feet wide with a 10/12 pitch and she has ...

Chinese Carved Wooden Box Plans

Menu
Catio – Free DIY Plans

This step by step woodworking project is about free catio plans. I have designed this catio for you to create a cozy shelter for your favorite pets. Your cats will enjoy the fresh air and they will bath in the sunlight, while being protected from the predators and from cars. You can adjust the size of the catio to suit your needs. See my other DIY projects HERE.

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting.

 

 

Made from this plan

Coping Crown Molding With A Grinderhow to Coping Crown Molding With A Grinder for  

 

Catio – Free DIY Plans

Building a catio with roof

 

Materials

  • A – 2 pieces of 2×4 lumber – 72″ long, 2 pieces – 93″ long BASE
  • B – 2 pieces of 2×2 lumber – 96″ long, 4 pieces – 85″ long, 6 pieces – 30″ long SIDE WALL
  • C – 2 pieces of 2×2 lumber – 69″ long, 4 pieces – 85″ long, 4 pieces – 19 1/2″ long, 1 piece of 2×4 lumber – 24″ long Coping Crown Molding With A Grinderhow to Coping Crown Molding With A Grinder for FRONT for 1 last update 2020/07/15 WALLFRONT WALL
  • D – 2 pieces of 2×2 lumber – 96″ long, 1 pieces – 91 1/2″ long SIDE WALL
  • E – 2 pieces of 2×2 lumber – 69″ long, 3 pieces – 85″ long, 4 pieces – 32 1/4″ long BACK WALL
  • F – 7 pieces of 2×2 lumber – 72 1/2″ long RAFTERS
  • G – 2 pieces of polycarbonate – 48″x72″ long ROOFING
  • H – 2 pieces of 1×4 lumber – 73 1/4″ long, 1 piece – 96″ long TRIMS
  • I – 2 pieces of 2×2 lumber – 69″ long, 2 pieces – 24″ long, 1 piece – 21″ long, 8 pieces – 8 3/4″ long the 1 last update 2020/07/15 DOORDOOR

Tools

Coping Crown Molding With A Grinderhow to Coping Crown Molding With A Grinder for Time

  • One Weekend

 

for 1 last update 2020/07/15   

How to build a 6×8 catio

Building the base for the catio

The first step of the project is to assemble the base for the catio. Use 2×4 pressure treated lumber and assemble the base, as shown in the diagram. Drill pilot holes and insert 3 1/2″ screws to lock them together tightly. Make sure the corners are square and align the edges flush.

Back catio wall frame

Use 2×2 lumber for the wall frames. Cut all the components as shown in the diagram and in the cut list. Drill pilot holes and insert 2 1/2″ screws to assemble everything together tightly. Make sure the corners are square and the edges flush.

Front wall – 6×8 catio

Coping Crown Molding With A Grinderhow to Coping Crown Molding With A Grinder for Frame the front wall, as shown in the plans. Leave an opening for a door. Use 2×4 lumber for the header.

Side wall frame for 6×8 catio

Coping Crown Molding With A Grinderhow to Coping Crown Molding With A Grinder for Frame the side wall, as shown in the diagram. Use the same techniques described above.

Side wall – catio 6×8

Assemble the the 1 last update 2020/07/15 other side wall frame.Assemble the other side wall frame.

Assembling the catio frame

After assembling the 4 wall frames, you need to assemble everything together. Lay the wall frames to the base and align the edges flush. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the base. In addition, lock the adjacent wall together tightly with screws. Plumb the walls plumb.

Rafters for the catio

Use 2×2 lumber for the rafters. Use a saw to make the cuts, as shown in the plans.

Fitting the rafters – catio plans

Place the rafters every 16″ on center and align the edges. Drill pilot holes and insert 3 1/2″ screws to lock the rafters into place tightly.

Fitting the roof sheets – 6×8 catio

Use polycarbonate sheets for the catio roof. Leave no gaps between the sheets so the roof is waterproof.

Door frame for catio

Coping Crown Molding With A Grinderhow to Coping Crown Molding With A Grinder for Use 2×2 lumber for the door frame. Cut all the components as shown the 1 last update 2020/07/15 in the diagram. Make 45 degree cuts at both ends of the braces. Drill pilot holes and use 3 1/2″ screws for the joints.Use 2×2 lumber for the door frame. Cut all the components as shown in the diagram. Make 45 degree cuts at both ends of the braces. Drill pilot holes and use 3 1/2″ screws for the joints.

Fitting the door to the catio

Fit the door to the front of the catio. Align the edges flush and attach the hinges to secure the door to the frame of the catio. Install a latch to keep the door locked. This the 1 last update 2020/07/15 door is ideal, because you have access to the interior of the catio to clean it.Fit the door to the front of the catio. Align the edges flush and attach the hinges to secure the door to the frame of the catio. Install a latch to keep the door locked. This door is ideal, because you have access to the interior of the catio to clean it.

Roof trims for catio

Use 1×4 lumber for the roof trims. Use a miter saw and make the angle cuts to the trims.

Fitting the trims to the catio roof

Fit the trims to the top of the catio and align the edges flush. Insert 2 1/2″ screws to secure the trims into place tightly.

Free Covered Catio Plans – Side View

Coping Crown Molding With A Grinderhow to Coping Crown Molding With A Grinder for Last but not least, you need to take care of the finishing touches. Apply a few coats of paint / stain over the components to protect them from decay and to enhance the look of the catio. Take a look over my window catio plans HERE.

Free for 1 last update 2020/07/15 Covered Catio PlansFree Covered Catio Plans

See all my cat plans HERE. If you like my project, don’t forget to SHARE it on Facebook and Pinterest. You can easily add shelves to the interior of the catio, so the pets can climb and have fun.

Smart Tip: Don’t forget to share your projects with me, as I love seeing what you guys are working on. Send me the pics HERE. In addition, take a look over the rest of my DIY projects HERE.

 

 

Thank you for reading our project about free catio plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.




Coping Crown Molding With A Grinderhow to Coping Crown Molding With A Grinder for Related Posts

Add Comment

Cancel reply

Coping Crown Molding With A Grinderhow to Coping Crown Molding With A Grinder for